Computer requirements, Lan type connection, Direct connection to a pc without hub – Panasonic WV-CU20 User Manual
Page 66: Connection to a client pc via hub, B computer requirements ■ lan type connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Computer Requirements
OS: Windows98, 98SE/Windows NT4.0/Windows2000 or Windows ME
Note: Windows95 are not applicable to this system.
WWW browser:
Internet Explorer Ver. 5.0 or higher
Netscape Navigator Ver. 4.7 or higher except Ver. 6.0 series
Display resolution: 800 x 600 pixels or more
CPU clock: 500 MHz or more
Memories: 128 MB or more
Network Interface Card: 10/100 Base-T
Video Card
Audio Card is required when using H.323 mode
LAN Type Connection
The figure below shows how the WJ-NT204 can be connected directly to a PC for testing before it is connected directly to a
network. The connection can also be made via a hub.
• Direct Connection to a PC without Hub
Connect the l0Base-T/l00Base-TX port on the PC to the Ethernet port on the WJ-NT204 with a crossover cable.
Combination Cameras (4)
• Connection to a Client PC via Hub
Connect the lOBase-T/IOOBase-TX port on the PC to the Ethernet port on the WJ-NT204 with straight cables via a hub.
Combination Cameras (4)
66