Wj-nt204 camera select, Input from wj-hd500, Wj-nt204 alarm list – Panasonic WV-CU20 User Manual
Page 122: Alarm reset, Camera preset registration, Camera control buttons, Status window, Image display, D i wn>e, 83li
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Control Operation
Type in the location bar
Type the identical address to that the WJ-NT204 is set to. The WJ-HD500 OPERATION VIEW window appears.
Cwy^i^A 0 ziu I
K
r
qw
*»
p
: 4twi tr^MVnC f.'e, L1 ^
<D
I Wn>E
TEU/
FAJt
IJEAP.
AUTO
CLOSE
orni
FCEiET
ON
83li
OFF
si
<
>
fid
SI
H
[|p|
SI
ii'
...
"zi
sé
I
© WJ-NT204 CAMERA SELECT
These buttons select the input to VIDEO IN 1-4 on the
WJ-NT204 to display it in the Image Display area.
® INPUT from WJ-HD500
Switches the window from that of WJ-NT204 control to
that of WJ-HD500 control.
Clicking this opens the 16-button panel on the left win
dow enabling the input selection to the video WJ-
HD500, and the control panel for operating the WJ-
HD500 on the bottom center.
© WJ-NT204 ALARM LIST
Displays the alarm list activated on the WJ-NT204.
© ALARM RESET
Resets the alarm mode activated on the WJ-NT204.
© CAMERA PRESET REGISTRATION
Registers the presently displayed image position of the
camera
directly
connected
to
the
WJ-NT204.
Manipulate the camera to the desired position, then
select the preset number with the pull-down button.
Click the SET button to register the position.
© Camera Control Buttons
These buttons control the combination camera desig
nated with WJ-NT204 CAMERA SELECT button for
pan/tilt, zoom, focus and auto-pan.
© Status Window
Displays information when an alarm is activated on the
WJ-HD500.
© Image Display
Displays the live camera image or playback image on
the WJ-HD500.
122