Cd wj-nt204 camera select, Input from frame switcher, Alarm list (wj-nt204) – Panasonic WV-CU20 User Manual
Page 117: Camera control buttons, Status window, Alarm reset, Wj-nt204 camera preset registration, S iml
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i! J.W. -»*'Va it
^'~~-mY
.7^-
.....
-77^
....
PAXTH-r
WE>E
TELI.
i^AT.
AtrrO
CL'jFE
open
I
pieet
oh
”
OFF
|V........ -.i
00^ !
lid.
m
iij
[ZJ □
HD
fm\
S iMl
m
EZ
"S*:;isS'Ss
®
-©
-®
CD
WJ-NT204 CAMERA SELECT
These buttons select the input to VIDEO IN 1-4 on the
WJ-NT204 to display it in the Image Display area,
® INPUT from FRAME SWITCHER
Displays the image supplied from the video multiplexer,
and opens the 16-button panel \where you can select
the input to the video multiplexer.
®
ALARM LIST (WJ-NT204)
Opens the alarm list activated on the WJ-NT204 trans
mitter.
® CAMERA CONTROL Buttons
Controls the Combination camera designated \with WJ-
NT204 CAMERA SELECT button for pan/tilt, zoom,
focus and auto-pan.
® Status Window
Displays alarm information when an alarm is activated.
® Image Display
Displays the camera image or multiscreen.
® ALARM RESET
Resets the alarm mode.
® WJ-NT204 CAMERA PRESET REGISTRATION
Registers the presently displayed image position of the
camera connected to the WJ-NT204. Manipulate the
camera to the desired position, then select the preset
number with the pull-down button. Click the SET button
to register the position.
117