Panasonic CQ VAD9300U - Manual (Page 100)

Troubleshooting
(continued)
Error Display Messages
□ CD/MP3/DVD/Video CD/CD Changer
Cause/Step
3
Disc is dirty, or is upside down.
■^Check disc.
Disc has scratches,
^Check disc.
No operation by some cause,
oppress [^1. If failure persists, press the reset switch. (Press the reset
switch in the CD changer). If normal operafion is not restored, call the
store where you purchased the unit or the nearest Panasonic
Servicenter.
The type of the file that is selected is not supported.
B^Check disc.
No disc is in the player.
^Insert disc into the disc slot.
No magazine is in the changer.
^Load the changer with CD-loaded magazine.
An attempt was made to play a PAL disc.
■=>Press [^] and check the disc.
An attempt was made to play a disc with a region number other than “1” or
“ALL”.
Express [^] and check the disc.
______________________________________________ _____
Notes;
• There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
• Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating
Instructions for the changer used.
□ Sirius
Cause/Step
3
Your location is out of receivable areas (e.g. in a tunnel), or the unit is decoding a
selected broadcast. The display appears also while the connections are being
checked after the power has been turned on.
E^Wait until getting out of the unreceivable area or completing the decod-
mg.
User's registration has not been carried out.
^Complete user's registration.
A channel that is not included in the agreement was selected.
c^Select a channel that is included in the agreement. Refer to the operat­
ing instructions for Sirius receiver with regard to the agreement.
The ID could not be acquired.
■^Contact your nearest Panasonic Servicenter for service.
100
CQ-VAD9300U