Panasonic CQ VAD9300U - Manual (Page 101)

□ Sirius (Continued)
C
Display
INVALID CHANNEL
3 C
Cause/Step
■NOTCCNNEGTEDri
[>
D>
The selected channel is invalid.
c^Select a channel which can be received instead.
• The Sirius receiver fails to operate for some reason,
• SET ON serves as the Sirius setting and the Sirius receiver has not been
connected.
^Select a channel which can be received instead.
Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior
cieaning. Never use benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced only by a qualified technician.
Replacing the Fuse
Use fuses of the same specified rating (5 A for display unit, 15 A for hide-away unit). Using different substitutes or fuses with
higher rating, or connecting the product directly without a fuse, could cause fire or damage to this unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
Reset switch
Insert a hard, slender stick into the hole and push the switch.
Important
Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.
If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs.
Display Unit Hide-away Unit
Reset switch
Notes:
• We recommend that you press both of the reset switches on the Display Unit and the Hide-away Unit one by one in any
order.
• If the ID-CODE has been already set, you will be asked to enter the ID-CODE right after the unit is restarted.
CQ-VAD9300U
101