Panasonic CQ VAD9300U - Manual (Page 66)

^ SET-UP: Sound Settings
(continued)
Change audio channels as shown below by pressing [DRC] (PRO LOGIC) (DOWN MIX) for more than 2 seconds.
Changing Dolby Digital/
dts Audio to 2-Channel
Stereo Playback
(Down mix)
Select down mix for easier listening
if audio is too low to be heard.
• Dolby Digital
□□IDOLBYJ
Om
D I G I T A L
DVDi
VIDEO
EUHHGUNO
5.1-Channel surround playback
(Number of channels: 1 to 5.1)
Down mix ^
2-channel stereo playback
D'OtUfJlMIXl
---------------(RS).
' ' ■ Ct<€
-------- (LS)-
l(S.W)
• When down mix is selected, center (C) and surround (RS) (LS) signals are
mixed with the signals of the two channels (stereo) of right front (R) and left
front (L) to be output. There will be no audio output from the center (C),
surround (RS), (LS) and subwoofer (SW), while the output audio from the
fronts (R) and (L) will be a little greater.
• If "FRONT" is set to "SMALL” in speaker setting (^ page 58) after selecting
down mix, there will also be audio output from the subwoofer (SW).
Changing 2-channel
Dolby Surround Audio to
4-Channel Surround
Playback (Pro Logic)
Effective for Dolby Surround DVD
playback
• Dolby Surround (Dolby Pro Logic)
nni DOLBY suFmourcil DVD>
PRO-LOGIC VIDEO
2-channel Dolby Surround audio
□D PRO logic Pro Logic
4-channel surround playback
• When Pro Logic (4-channel surround playback) is selected, 2-channel Dolby
Surround audio is output after conversion to a 4-channel output from the
center (C), front (R), (L) and surround (RS), (LS). (The same audio from
(RS)and (LS).)
Changing 2-channel
audio/analog audio to
4-channel surround
playback (Pro Logic)
Even 2-channel audio/analog audio
not recorded in Dolby Surround
audio can be switched to
4-channel surround playback.
LPCM/MP3
VIDE
cay
• Dolby Digital/dts 2-channel
• Analog audio (VTR, CD changer)
«
2-channel audio/analog audio
QQ PRO LOGIC Pro Logic
4-channel surround playback
H
audio (except for Dolby Digital/dts
2-channel).
• When Pro Logic (4-channel surround playback) is selected, 2-channel
audio/analog audio is output after conversion to a 4-channel output from
the center (C), front (R), (L) and surround (RS), (LS). (The same audio from
(RS) and(LS).)
Note: Pro Logic (4-channel surround playback) selection does not apply to
TV and radio.
Note: For each audio recording system (Dolby Digital/dts/Dolby Surround (Dolby Pro Logic)/LPCM), refer to the
Definition of Terms. page 104)
66
CQ-VAD9300U