Setting, Direct image capture (oniy for remote control), Setting k – Panasonic CQ VAD9300U User Manual
Page 53: Direct image capture, A] [v
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[MODE]
(End)
[MENU]
[A] [V]
[<][>]
(Select)
[ENTER]
Notes:
• Press [MODE] to return to the regular mdde.
• The display returns to the previous one if th’ere is no
operation for more than 60 seconds after changing to
the setting menu.
Setting
K
i
/
© Press [ENTER] to import the image.
® Press [>] or [<] to select a save area.
• You can store five images at maximum.
• The existing image is replaced v/ith a new image when saving an image in
an area. Check the right-hand smaller image on the screen before saving a
new one. If you would like to keep the existing image, do not overwrite.
© Press [ENTER] to save the image.
i MflGEi
j^1R0E5i^airg]^^Jf:l_fi[iE5::CflS[EL i
r"C6PtUREr7riEL£CT ENTER^S^T^niODE:
® Image saving completed.
Notes:
• Do not turn off the unit while saving an image.
• To capture an image from TV, the broadcasting condition should be fairly
well.
ENTER:SET UOD£:END
[OSD]
(CAPTURE)
Direct Image Capture
(Oniy for remote control)
If you would like to capture a picture, press and hold [OSD] (CAPTURE) for
more than 2 seconds.
Subsequent steps are the same as the steps @ described above.
CQ-VAD9300U
53