Panasonic CQ VAD9300U - Manual (Page 42)

SET-UP: User Settings
(continued)
[MENU] [MODE]
(End)
[Л] [V] [<] [>]
(Select/adjust)
[ENTER]
MENU
:<IUTE j ' r 1 s c r e e n D V D ►
loiniiui/müiiii
N f l V I S E T U P
C A M E R A S E T U P
I D - C O D E
e t c
M E M O R V C L E A R
V T R S K I P
*^<*-ENTER:SELECT
Submenu
Rear View Camera Set up
CAMERA INPUT (Rear view camera input)
Selection of the terminal that connects to the
rear view camera allows you to view images
through the rear view camera automatically
when you put the shift lever into the reverse
position.
Preparation: Connect the reverse lead.
(=> page 93)
Default; OFF
SCALE (Rear view camera scale display)
Images through the rear view camera can be
shown in the scale display mode.
Default; OFF
SCALE ADJUST (Scale adjustment)
Default; 0 (width/angte)
ID Code setting
Prior to operating this unit, it is advisable to
assign your 4-digit ID code for security.
(Make sure to use lour digits for ID code.)
Once the ID code has been set, the unit cannot
be operated if the main power supply is dis­
connected then re-connected. It is electronical­
ly locked so that a thief could not use the
stolen unit unless that person knows the code
you have set.
The ID code operation must be performed only
by the person whom the unit belongs to.
Generally, it is not necessary to enter the ID
code each time when using the unit if it has
never been disconnected from the main
power supply (car battery).
Л r
® Press [MENU] to
display the menu.
(D Press [>] or [<] to
select “USER”.
USER
SCREEN
DVD
X
DATE
i
CAPTURE
i
AUDIO x:
SIRIUS
© Press
[A]
or
[V]
to
select “CAMERA SETUP”.
® Press [ENTER] to set.
CAMERA SETUP
© Press [Л] or
[V]
to '
select “ID-CODE".
©Press [ENTER] to set.
ID-CODE
J к
42
CQ-VAD9300U