Panasonic CQ VAD9300U - Manual (Page 96)

Troubleshooting
(continued)
□ DVD video, Video CD, CD, CD-R, CD-RW
c
Trouble
The disc is inside but
no sound.
The disc is ejected
automatically.
Sound skip due to
vibration.
The buttons do not
work.
3 C
Cause/Step
3
The disc is upside down.
i4Place the disc in the correction direction, the label side up.
>
The disc is dirty.
^Clean the disc, referring to the section on “Notes on Discs” page 103).
The unit can only play the following types of discs; OVD video, video CD, music
CD and MP3.
CD sound skips, tone
quality is low. t>
>
[>
r
Connect the optical fiber cable.
)
The disc is dirty.
■^Clean the disc, referring to the section on “Notes on Discs” page 103).
Mounting angle is over 30°.
•«^Adjust mounting angle to less than 30°.
Unstable mounting.
^Mount the unit securely with the mounting parts, referring to the section on
installation.
Some operations are not permitted with certain discs.
(Refer to the guide provided with your disc.)
• Disc is defective.
• Mechanical trouble.
■^Press [^]. If failure persists, press the reset switch. If normal operation
is not restored, call the store where you purchased the unit or the nearest
Panasonic Servicenter.
□ DVD video
d
Trouble
3 C
Cannot switch the audio
language/subtitle
tanguage/angle.
Cause/Step
The audio/subtitle
language selected in the
DVD settings is not
used.
>
o
• It is not possible to switch if the disc does not have multiple audio lan-
guages/subtitle languages/angles recorded on it. (Refer to the guide provided
with your disc.)
• Some discs permit switching through a menu screen,
• Sometimes, switching angles is possible only with certain scenes.
If audio or subtitles in the languages are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching through
a menu screen. Refer to the guide provided with your disc.)
96
CQ-VAD9300U