Manual preset memory, Preset station calling, Am/fm – Panasonic CQ VAD9300U User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Select a band and frequency, (step 0 and 0 on the previous page)
Press and hold [1] to [6] on the remote control for more than 2 seconds.
The frequency blinks once, and
a receiving station is saved in
the memory.
Select a band, (step
0
on the previous page)
Press and hold [ENTER] for more than 2 seconds.
AM/FM
107i9 Mm
• The 6 strongest available stations will be automatically saved in the
memory under preset numbers 1 to 6.
• Once set, the preset stations are sequentially scanned for 5 seconds
each.
• To stop the scanning, press [1] to [6] on the remote control.
Note: New stations overwrite existing saved stations after following this procedure.
Preset Station
Calling
Select a band, (step
0
on the previous page)
Press [1] to [6] on the remote control.
CQ-VAD9300U
35