Panasonic CQ VAD9300U - Manual (Page 83)

Insert the grounding plate into the antenna body and hold the antenna element with the Antenna Clamp
. Screw Select a suitable screw point for
the grounding plate to adhere to a
metal part and remove the screw
and the terminal cover.
Follow the steps below to install the grounding plate.
O Insert the grounding plate into the antenna body.
© Hold the grounding plate with the terminal cover.
© Screw the grounding plate.
O Hold the antenna element with the Antenna Clamp @).
Terminal cover
O
—s------------
Grounding
Plate
Caution: Be sure to connect
the grounding plate. Otherwise,
desensitization will be caused.
Some models restrict the installation
of the TV antenna due to rear window
size or open/close of the hatch.
Contact your dealer.
Cord routing
Hold the cord with
a Cord Clamp
Route the cord behind the
rear seat and affix it with
adhesive tape.
Route the cord inside the
upholstery and under the
carpet.
Peel the sheet from the back of antenna body
and affix it. Then, affix the grounding plate on a
metal part.
Follow the steps below to affix the antenna securely.
O Affix the antenna body.
© Straighten the antenna element and affix it.
© Put the Antenna Clamp on the center of the antenna element.
O Adjust the angle and position of the grounding plate and affix it.
For some models, you cannot straighten
the longer element.
No bending
Comfortably curving
Cautions:
• Avoid contacting the adhesive surface.
• Do not re-adhere to avoid weakening adherability.
• Avoid adhering on the heating wire as much as possible.
CQ-VAD9300U
83