Sound settings, Trouble, Left and right sounds are reversed – Panasonic CQ VAD9300U User Manual

Page 99: No sound on the speaker, No sound from the subwoofer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

□ Sound Settings

c

Trouble

D C

Cause/Step

No sound from left,
right, front, or rear

speaker.

Left and right sounds

are reversed.

No sound on the
speaker.

>

r

Cables are not correctly connected.

^Connect the cables correctly.

i______________________ ______________________

J

The speaker leads are connected in reverse between right and left.

^Connect the speaker wires to the correct one.

The speaker setting is "NO” or “NONE”

^Set it correctly.

No sound from the
subwoofer

Playing back a disc having a subwoofer channel

1

• Subwoofer is set to “NO” in the speaker setting.

■►Set subwoofer to “YES".

• Down mix

-►No technical trouble. Cancel the down mix.

• Private mode is set to “ON".

^Set private mode to “OFF”.

[>

A disc without subwoofer channel is played back, or analog audio is played

back

• Subwoofer is set to “NO” in the speaker setting.

■kSet subwoofer to “YES”.

• Sound field is set to “OFF”.

■^No technical trouble. Set it to other than “OFF”.

• A disc recorded on 1 ch, 3 ch, 4 ch, or 5 ch is played back.

■^No technical trouble. No audio is output from the subwoofer when such

a disc is played back.

Note: Sound does not come out of the subwoofer with default speaker set­

ting when SPACE is set to OFF. {However, some speaker settings allow

sound output even if SPACE is set to OFF.) If SPACE is set to VOCAL, the
sound output level from the subwoofer is lower than other SPACE settings

(except for OFF).

CQ-VAD9300U

99

Advertising