Panasonic CQ VAD9300U - Manual (Page 80)

Installation Guide
(continued)
□ Installation Procedures (When not using Mounting Collar
® )
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole positions and hole shape of the bracket.
j] ® Binding-Head Screw (M5 x 6 mm) 2 pieces
([ U Recycle the Binding-Head Screws that fixed the transportation brackets for two more
positions.
Ш
(i|> Binding-Head Screw (M4 x 3 mm)
4 pieces
f^When using these
^
mounting holes
Ш q 3) Flat-Head Screw {M5 x 6 mm) 4 pieces
Use the supplied Spacer (O) if mounting hoie of your car is shaped like below.
Binding-Head Screw
ВаШР1ЙШ1Ш^
Before mounting the speaker, wipe water, dust and oil stains
off from the place where the speaker should be mounted to
enhance adhesive strength.
Cautions:
• Do not install the speaker in a location which obstructs
operation of the air bag or other safety equipment.
• Do not leave a credit card or other magnetic cards near
the speaker to avoid damaging the cards.
speaker
© Double-Faced
Adhesive Tape
80
CQ-VAD9300U