Vtr1/vtr2 mode – Panasonic CQ VAD9300U User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
VTR
Mode display
[MODE]
You can view the images and listen to the sounds
from the connected external devices in the VTR1
mode and VTR2 mode respectlveiy.
[MODE]
VTR1/VTR2 Mode
Press [MODE] to change to VTR1 or VTR2 mode.
Note: You can set up the system so that the VTR
mode is not selected (VTR skip). (=» page 44)
(VTR set to either CAMERA INPUT and NAVI INPUT is
not skipped even if VTR skip is set to on.)
24
CQ-VAD9300U
Advertising