Common (continued), M remote control – Panasonic CQ VAD9300U User Manual
Page 95
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Common (Continued)
d
Trouble
) C
Cause/Step
The monitor does not
go back into the unit.
The monitor direction is not proper.
^Change the monitor direction to the center.
The monitor stops on the way to the home position.
Raise the monitor a little and press [01 (OPEN/CLOSE).
Noise
Picture is not clear.
>
i A mobile phone is used near the unit.
^Keep the mobile phone away from the unit.
The unit’s grounding wire is not connected securely,
^Check the metal areas of the car body (chassis), and connect the
grounding wire more securely.
□ Monitor
Trouble ]
Cause/Step }
The tilt angle or the
front-rear position of
the display is not
adjustable.
___________________
>
There is an obstacle.
^Install the unit where the unit moves freely.
^
)
m Remote Control
TV
c
Trouble
3 C
Unclear image due to
noise
Cause/Step
t>
The intensity of the radio wave is too low.
■f Change the broadcast station.
J
Connection or installation of the TV antenna has not been performed correctly.
i^Check the connection or installation.
CQ-VAD9300U
95