KEYENCE LJ-H1W User Manual
Page 14
Starting and Exiting LJ-Navigator
1-10
LJ-H1W-M-NO1-E
3
Select [Environmental settings to be read from file] or [Environmental settings set to default].
The following procedure changes depending on whether [Environmental settings to be read from file] or
[Environmental settings set to default] is selected.
When [Environmental settings to be read from file] is selected
Select an environment setting file (*.env) to read and click the [Open] button.
LJ-Navigator starts up.
When [Environmental settings set to default] is selected
LJ-Navigator starts up with the defaults.
When [Read the settings of the connected controller] is selected
Select [Read the settings of the connected controller] and click the [OK] button.
The setting files (configuration file and program file) on the connected controller are read
and LJ-Navigator starts up.
Note
In order to read the controller settings, proper communication must be possible between the controller and computer.
"Connecting via USB" (Page 1-12)