KEYENCE LJ-H1W User Manual
Page 22
Advertising
Connecting via Ethernet
1-18
LJ-H1W-M-NO1-E
5
Select [Communication via Ethernet] from the [Comm settings] dialog.
1.
To enter the IP address for the connected controller directly
Select [IP address (controller)] and enter the IP address for the connected controller.
2.
To search for the connected controller
Note
Turn the controller on beforehand and check that it is communicating properly.
• Select [Connected controller] and click the [Check connected controller] button.
• LJ-Navigator automatically searches for the connected controllers and displays the possible IP
addresses in the pull-down menu. Select a controller for communication.
6
Click the [OK] button to close the [Comm settings] dialog.
192.168.0.10
192.168.0.11
192.168.0.13
Advertising