KEYENCE LJ-H1W - Manual (Page 9)

Starting and Exiting LJ-Navigator
Getting St
a
rted
1
1-5 LJ-H1W-M-NO1-E
Starting and Exiting LJ-Navigator
This section describes how to start and exit "LJ-Navigator".
Note Note
• Multiple instances of LJ-Navigator cannot be started up at the same time.
• The USB, Ethernet, and RS-232C interfaces on a single controller cannot be used at the same time.
• Communication is disabled when the controller is in the "Setting mode".
LJ-Navigator starts up in one of the following methods:
• Start up with the default values
• Read from a file
• Read the settings of the connected controller
1
Click the [Start] button and then select LJ-Navigator, or double-click on the LJ-Navigator icon on the
desktop.
LJ-Navigator starts up. The main screen and the [Select the settings to display upon startup] dialog box are
displayed.
Reference
Click the [Exit] button to exit LJ-Navigator.
Starting