KEYENCE LJ-H1W - Manual (Page 40)

View Measurement Value
4-2 LJ-H1W-M-NO4-E
View Measurement Value
This section describes displaying the values measured with the controller in real time on the LJ-Navigator.
The values measured by the controller can be displayed in real time in the [View measurement value] window.
Measurement controls such as a trigger, timing, zero and reset input can also be performed on the controller.
(1)[Measurement value acquisition start] button
Displays the values being measured by the controller in real time on LJ-Navigator.
:Displayed after the measurement values has been completed. Click this button to start
receiving measurement values.
:Displayed while the measurement values are being received. Click this button during
measurement to stop receiving the values.
(2)Measurement value display
Displays the measurement result from the controller for each OUT setting.
The values for all of the OUT settings (OUT1 to OUT8) that are set on the controller are displayed.
Functions and Display
(3)
(5) (4)
(1)
(2)
Measured value
Tolerance comparator output
Timing/zero display