KEYENCE LJ-H1W - Manual (Page 43)

View Measurement Value
4-5
Di
s
pl
a
ying the
Me
asu
rement D
a
ta
4
LJ-H1W-M-NO4-E
3
Click the [Measurement value acquisition start] button.
The measurements for the OUT settings that are configured in the controller appear in the window.
Reference
• If communication is not possible between LJ-Navigator and the controller, or if a head is not connected, the following dialog
appears shortly after clicking the [Measurement value acquisition start] button or [Trigger] button.
Check the connection between each head and between LJ-Navigator and the controller.
• For more information about the OUT settings, see "LJ-G Series User's Manual".
[Measurement value acquisition start] button