KEYENCE LJ-H1W - Manual (Page 72)

Settings
5-8 LJ-H1W-M-NO5-E
For more information about OUT settings, see "LJ-G Series User's Manual".
OUT Settings
(1) OUT setting No. Select the OUT setting No. that you want to configure.
(2) OUT name Changes the name of the selected OUT setting.
(3) Measurement mode Displays the advanced settings for measurement mode.
(4) Measurement mode
settings
Displays the [Measurement mode setting] window and sets the measurement mode.
(5) Measurement conditions Sets the measurement conditions.
(6) Min display unit Selects the minimum display unit for the measurement value.
(7) Scaling settings The [Scaling settings] dialog box appears and sets the scaling.
(8) Tolerance Sets the upper and lower limits for tolerance.
(9) Copy OUT settings Copies the currently selected OUT settings.
The copied OUT settings can be pasted with [Paste OUT settings].
(10) Paste OUT settings Takes the settings that were copied with the [Copy OUT settings] button and pastes
them into the currently displayed OUT settings.
(2)
(10) (9) (1)
(3)
(4)
(5)
(6)
(7)
(8)