A&D Weighing BM-20 - Manual (Page 20)

18 BM series
5.3.
Selecting Unit And Weighing Mode
Preset the sequence of displaying units and
weighing modes to fit the frequency of use.
Refer to "
5.2 . Storing The Active Units".
Pressing the MODE key in the weighing mode,
the unit and weighing mode can be displayed in
order.
BM-22 and BM-20 are preset units in the
factory. (Milligram), (Gram) is displayed
in order.
For BM-252, BM-500, BM-300 and BM-200
are preset units in the factory.
(Gram), (Milligram) is displayed in order.
Density mode
To use the density mode, it must be stored in
the function table as described on page 17.
Refer to "
14. Density Measurement" for
details about the mode.
To select this mode, press the MODE key
until the processing indictor blinks with
the unit "g" displayed.
The unit sequence of the factory settings.
Turning on the display.
BM-252
BM-500
BM-20 BM-300
BM-22 BM-200
Counting mode
Percent mode
Ounce (Avoir)
Troy Ounce
Metric Carat
Momme
Pennyweight
Grain (UK)
Tael
Tola (India)
Messghal
Density mode