A&D Weighing BM-20 - Manual (Page 76)

74 BM series
Error code
This example is of an error using the R command. " erCd on " is used. The balance transmits an error
code when the received command can not be achieved.
Computer Time Balance
R command
CAL command
Weighing mode (unstable)
Command received
In process
When the R command can not be
achieved due to unstable weighing:
Error code
When the CAL command is received, the
balance returns to the weighing mode.
Command completed.
Weighing mode
Weighing with a tare
This example uses " erCd on " of " 5if " so that the <AK> (06h) code is output.
Computer Time Balance
R command
TR command
S command
?PT command
Sets the display to zero
Command received
In process
Command completed
Zero display
Place a container
Tares
Command received
In process
Command completed
Zero display
(Net value)
(Tare value)