A&D Weighing BM-20 - Manual (Page 87)

BM series 85
Other Options
Order code Name and description
AD-1670
Anti-vibration table
Approximately 24kg, Artificial stone (Terrazzo).
Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922 remote controller to avoid a weighing error by a slight table tilt
that key operation may make.
AD-1682
Rechargeable Battery
This option allows use of the balance in a place where AC power is not available.
AD-1684
Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or
peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static
eliminator.
AD-1688
Data logger
When connected to the RS-232C interface of the balance, the AD-1688 can store
the data in an environment where a personal computer can not be used.
AD-1689
Tweezers for calibration weight
This option is the same as the tweezers provided as a standard accessory and is
used when calibrating the balance using an external weight.
AD-8526
LAN Converter
This option can be used to connect the RS-232C interface of the balance to the
Ethernet (LAN) port of a computer. This allows management of the balance
weighing data with a computer connected to a network.
AD-8920A
Remote Display
This option can be connected to the balance using the RS-232C interface.
AD-8922A
Remote Controller
This option can be connected to the balance using the RS-232C interface and can
control the balance remotely.
Various options such as comparator output or analog output are available.
AX-MX-36 Tweezers for filter weighing 2 pieces