Interlogix Concord Express Installation Manual - Manual (Page 41)

Chapter 2
Concord Express Installation Instructions 35
Quick Exit (0012) Security-Partition 1 (Default =
on)
This setting determines whether or not users can open and
close a standard entry or exit door without causing an alarm
(while the system is armed). This feature would be useful if
the user wanted to go out to get the morning paper while the
system was armed. This feature also allows the user to leave
the armed premises without having to disarm and rearm the
system.
Note : For UL Listed systems, Quick Exit must be turned off.
When this feature is on, pressing D on a touchpad (while the
system is armed) starts a 2-minute timer that allows one
standard entry or exit door (sensor groups 10 and 19 only) to
be activated once (opened, then closed).When this feature is
turned off, the system must be disarmed before opening any
protected door.
To turn Quick Exit off or on:
1. With the display showing
QUICK EXIT OFF/ON
(current
setting), press 1 (off) or 2
(on). The display flashes the
entered setting.
2. Press # and the display
shows the new setting.
Exit Extension (0013) Security-Partition 1 (Default =
on)
This setting determines whether or not the system
automatically arms to STAY (level 2) if the user arms the
system to AWAY (level 3) without exiting the premises. This
can help prevent accidental alarms by deactivating interior
motion sensors during occupied arming periods.
Note : Arming the system to AWAY with No Delay overrides
the Auto Stay Arming feature.
With the feature turned on, the user arms the system to
AWAY. Touchpads (and other status sounders) emit one exit
delay beep every four seconds, then one every second during
the last 10 seconds. If the exit delay time expires with no
standard delay sensor activation, the system automatically
arms to STAY.
To turn Auto Stay Arming off
or on:
1. With the display showing
AUTO STAY ARMING OFF/ON
(current setting), press 1 (off)
or 2 (on). The display flashes
the entered setting.
2. Press # and the display
shows the new setting.