Interlogix Concord Express Installation Manual - Manual (Page 47)

Chapter 2
Concord Express Installation Instructions 41
Latchkey Rpts (0124-pager 1, 0134-
pager 2, 0144-pager 3) Phones-Pager Phone 1-3 (Default=on)
This setting determines whether or not
the panel reports to a pager when the
system is disarmed by using the latchkey
modifier (6) and latchkey designated
access code. To turn Latchkey reports off or on:
1. With the display showing
LATCHKEY REPORTS
OFF/ON
(current setting), press 1 (off) or 2 (on).
The display flashes the entered setting.
2. Press # and the display shows the new setting.
Streamlining (0125-pager 1, 0135-
pager 2, 0145-pager 3) Phones-Pager Phone 1-3 (Default=on)
This setting determines whether the
panel includes (off) or excludes (on) the
account number when reporting to a
pager. To turn Streamlining off or on:
1. With the display showing
STREAMLINING OFF/ON
(current setting), press 1 (off) or 2 (on). The
display flashes the entered setting.
2. Press # and the display shows the new setting.
The following describes how to program the phone settings that appear under
DOWNLOADER PHONE.
Phone Number (0150) Phones-Downloader (Default=none)
This setting is used for entering the phone
number of a computer used for programming the
panel from off-site. Phone numbers can be 1-24
digits long, including pauses or * and #
characters. To enter pauses, press C. To enter *,
press and hold 7 for one second. To enter #,
press and hold 9 for one second.
Note : Call-waiting services should be disabled to
prevent interruptions to panel communication to
the central monitoring station (or pager). To
program a dialing prefix that disables call-waiting,
see the Call Wait Cancel setting under the menu
PHONE OPTIONS—GLOBAL.
To program a downloader phone number:
1. With the display showing
PHONE NUMBER
(current number), enter the desired
phone number. The display flashes the
entered number.
2. Press # and the display shows the new
setting.
To delete a downloader phone number:
With the display showing
PHONE NUMBER _
(current number), press D. The display shows
PHONE NUMBER _
.
Phone Options Menu
The PHONE OPTIONS menu lets you set up system phone access and
communications that affect the whole system (global) or a specific partition.
The following describes how to program the phone option settings that appear
under GLOBAL.