Cisco OL-15491-01 - Manual

A-1
Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide
OL-15491-01
A P P E N D I X
A
CSG2 Command Reference
This appendix documents the commands necessary to configure and monitor the CSG2. Other
commands used with the CSG2 are documented in the following publications:
• Service and Application Module for IP User Guide for the following commands:
– Supervisor console commands
– Power PC console commands
– Power PC ROM-monitor (ROMmon) console commands
– Broadcom BCM Linux-based Storage Area Network Operation System (SanOS) console
commands
– Broadcom BCM ROMmon console commands
– Line Card Processor (LCP) console commands
• Cisco IOS Server Load Balancing Command Reference for IOS SLB-specific commands
• Cisco IOS Release 12.2 command reference publications for other IOS commands
All of the CSG2 commands are listed below in alphabetical order:
• accounting, page A-6
• activation, page A-7
• aoc append url, page A-9
• aoc confirm, page A-10
• aoc enable, page A-12
• basis, page A-14
• block, page A-17
• class, page A-18
• clear ip csg, page A-19
• clear ip iscsi statistics, page A-21
• clear record-storage-module stats, page A-22
• client-group (CSG2 content), page A-23
• content (CSG2 service), page A-25
• debug ip csg, page A-27
• entries user idle, page A-32