TeeJet Matrix Pro 840G User Manual - Manual (Page 106)

99
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Next Curved Guideline Feature
If more than one curved AB guideline is saved, the Next Curved
Guideline feature will become available. By pressing the Next
Curved Guideline option, the vehicle will be directed to the next
curved AB guideline saved in the console.
1. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
2. Press NEXT CURVED AB GUIDELINE icon .
Toggle between all guidelines by pressing the NEXT CURVED
GUIDELINE icon again.
NOTE: If no curved AB guideline or only one curved AB guideline is
saved in the console, the Next Curved Guideline icon will not
be displayed.
Figure 7-38: Next Guideline
-13 7.2 mph
Mark A
A A
To view which guideline is active, press the Guidance Mode icon on
the Status Bar.
Figure 7-39: View Which Guideline is Active
-13 7.2 mph
Mark A
Pattern: Curved Ab
Name: Stream Edge
Total: 4
Circle pivot Guidelines
Circle Pivot guidance provides guidance around a central location
that radiates inward or outward based on an initial AB reference line.
This initial baseline is used to calculate all other guidelines based on
the programmed guidance width.
Marking A and B Points
To establish an AB guideline:
1. Drive to the desired location of Point A .
2. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
3. While the vehicle is in motion, press MARK A icon A .
4. Drive along the arc that the pivot would create (a wheel track is a
good guide) to the desired location of Point B .
5. Press MARK B icon B to establish the AB line.
6. “Would you like to name this guideline?”
Press:
►Yes – to enter a name and save the guideline in the console
►No – to automatically generate a name and save the guideline
in the console
The console will begin providing navigation information.
NOTE: The MARK B Icon
B is not available for selection
(greyed out) until the minimum distance is travelled
(164.0 feet / 50.0 meter) or if driving in a straight line.
NOTE: It is not necessary to drive the entire circumference of the
center pivot in order to initiate guidance.
Use CANCEL MARK icon to cancel the Mark A command and
revert to the previous circle pivot guideline (when established).
Figure 7-40: Mark A Point
1:12 PM 7.2 mph
Mark A
A