TeeJet Matrix Pro 840G User Manual - Manual (Page 74)

67
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Simple Job Mode Options
If 'Simple' Job Mode is selected in the Options page, only the current
job can be reported.
1. Insert a USB drive into the console.
2. Press the desired file format and the report will be generated and
saved to the USB drive.
3. An information box will appear as confirmation that the report(s)
were saved successfully.
4. Repeat as needed.
5. Remove USB Drive from the console.
Figure 6-76: Reports Options
data-> Reports
Save All Formats
Save KML
Save PDF
Save SHP
data-> Reports
Please wait, saving PdF, Google, and
ESRi data to thumb drive.
do not remove thumb drive.
data-> Reports
Saved data to thumb drive.
Advanced Job Mode Options
If 'Advanced' Job Mode is selected in the Options page, any stored
job can be reported.
1. Insert a USB drive into the console.
2. Under Internal Storage, select the job name to be reported.
3. Press the desired file format and the report will be generated and
saved to the USB drive.
4. An information box will appear as confirmation that the report(s)
were saved successfully.
5. Repeat as needed.
6. Remove USB Drive from the console.
Figure 6-77: Save PDF
data-> Reports
internal Storage
PdF
KMl
SHP
All
Field 1
Test drive
Fri dec 3 01:02:00 2010
Please wait, saving PdF, Google, and
ESRi data to thumb drive.
do not remove thumb drive.
data-> Reports
internal Storage
PdF
KMl
SHP
All
Field 1
Test drive
Fri dec 3 01:02:00 2010
data-> Reports
internal Storage
PdF
KMl
SHP
All
Field 1
Test drive
Fri dec 3 01:02:00 2010
data-> Reports
internal Storage
PdF
KMl
SHP
All
Field 1
Test drive
Fri dec 3 01:02:00 2010
Saved data to thumb drive.