TeeJet Matrix Pro 840G User Manual - Manual (Page 112)

105
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
RETURN TO POiNT
Return to Point provides guidance back to an established point in
Vehicle View and Field View. In Vehicle View an arrow directs the
vehicle back to the established point. In Field View only the point is
displayed.
A return point is not job specific and will remain active until canceled.
Marking a Return Point
To mark a return point:
1. Drive to the desired location of Return Point .
2. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
3. Press ADD POINT icon .
Figure 7-59: Return Point Established – Vehicle View
8:19 AM 1.7 mph
8:21 AM 1.7 mph
Guidance to a Return Point
To show distance and guidance to the established point:
1. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
2. Press the RETURN TO POINT GUIDANCE icon .
The console will begin providing the distance information on the
Guidance Bar from the vehicle to the established point.
Figure 7-60: Return to Point Guidance – Vehicle View
8:19 AM 1.7 mph
8:53 AM 1.7 mph
457 ft
Use CANCEL RETURN TO POINT icon to stop guidance and
delete the established point.
Figure 7-61: Cancel Return to Point Guidance
8:19 AM 1.7 mph