Overlap, Delay on, Delay off – TeeJet Matrix Pro 840G User Manual User Manual
Page 47: Overlap delay on, Delay on time (s), Delay off time (s)
40
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Overlap
Overlap determines the amount of overlap allowed when each boom
section is turned on and off using Automatic Boom Section Control.
1. Press DOWN arrow to access the list of options.
2. Select:
►0%
►50%
►100%
Figure 6-16: Overlap
Config->implement (2)
Overlap
delay Off
delay On
1.00 s
1.00 s
50%
0%
50%
100%
100%
50%
0%
Delay On
Delay On functions as a “look ahead” for establishing the timing
for the boom section valves to switch on exactly when entering an
area that has not been applied. If the boom turns on too soon when
entering a non-applied area, decrease the Delay On setting. If the
boom turns on too late when entering a non-applied area, increase
the Delay On setting. Range is 0.0 - 10.0 seconds.
1. Press the KEYPAD icon
.
2. Use the entry screen to establish the delay on time.
Figure 6-17: Delay On
Config->implement (2)
Overlap
delay Off
delay On
1.00 s
1.00 s
50%
delay On Time (s)
1
2
3
1.00
Clear
4
5
6
<--
7
8
9
0
.
+/-
Delay Off
Delay Off functions as a “look ahead” for establishing the timing for
the boom section valves to switch off exactly when entering an area
that has been applied. If the boom turns off too soon when entering
an applied area, decrease the Delay Off setting. If the boom turns
off too late when entering an applied area, increase the Delay Off
setting. Range is 0.0 - 10.0 seconds.
1. Press the KEYPAD icon
.
2. Use the entry screen to establish the delay off time.
Figure 6-18: Delay Off
Config->implement (2)
Overlap
delay Off
delay On
1.00 s
1.00 s
50%
delay Off Time (s)
1
2
3
1.00
Clear
4
5
6
<--
7
8
9
0
.
+/-