TeeJet Matrix Pro 840G User Manual - Manual (Page 118)

111
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Split Camera view
Split Camera View allows one (1) of two (2) sets of four (4) camera
inputs (A/B/C/D or E/F/G/H) to be selected to divide the screen into
four (4) separate video feeds while in RealView Guidance if a Video
Selection Module (VSM) is attached.
When an eight (8) channel VSM is on the system, up to eight (8)
cameras can be installed. When a four (4) channel VSM is on the
system, up to four (4) cameras can be installed.
To change the active set of split camera views:
1. Press REALVIEW OPTIONS icon to display RealView
options.
2. Press the SPLIT VIEW icon .
3. Select:
►Cameras A/B/C/D
A
D
B
C
►Cameras E/F/G/H
F
H
E
G
Figure 7-75: Select Split View
0.0 mph 0 ac
Mark A
0.0 mph 0 ac
Mark A
A
D
B
C
F
H
E
G
0.0 mph 0 ac
Mark A
realview Setup options
RealView setup options accesses additional guidance tools including
guidance over video and a steering angle indicator.
Figure 7-76: RealView Setup Options
0.0 mph 0 ac
Mark A
0.0 mph 0 ac
Mark A
0.0 mph 0 ac
Mark A