TeeJet Matrix Pro 840G User Manual - Manual (Page 30)

23
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
SiMPlE MOdE
Once the power up sequence has completed, the Home screen will
appear with the option to start a new job or continue an existing job.
In simple mode, only one job will be available at a time. Only
bounded and applied area are displayed on the home screen.
Only the current job is available for saving in Reports. Job specific
information input with Fieldware Link is not available.
The console must have GPS before starting or continuing a job.
Figure 4-3: GPS Not Available
12/14/10 3:52 AM
Must have valid GPS signal before starting job.
Please wait.
New Job Continue
Figure 4-4: Home Screen with Acquired GPS
12/14/10 3:52 AM
do you want to start a new job data or continue last job?
Starting a new job will clear the previous job data.
New Job Continue
Figure 4-5: Home Screen with Job Active
12/14/10 6:33 AM
Applied: 17.21 ac
bounded: --
Close Job
new Job
To start a New Job:
1. Press New Job .
The console will jump to Vehicle View.
Figure 4-6: Start New Job with No Previous Job Started
12/14/10 3:52 AM
do you want to start a new job data or continue last job?
Starting a new job will clear the previous job data.
New Job Continue
0.0 mph 0,00 ac
Mark A