TeeJet Matrix Pro 840G User Manual - Manual (Page 116)

109
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Matrix Pro 840G
To adjust the view:
1. Press ZOOM IN/OUT buttons .
NOTE: Press & hold ZOOM IN/OUT buttons to quickly
adjust settings.
Figure 7-69: Zoom In and Out Buttons
PAN MOdE
While in Field View Guidance, the pan mode allows the screen to be
positioned manually as desired.
To enter pan mode and pan across the screen:
1. Press the screen to activate arrows and world icon.
2. Press ARROWS
in the corresponding direction
to move the view on screen (down, left, right, up).
NOTE: Press WORLD VIEW icon to center vehicle on screen
and extend the screen view to the widest area available.
NOTE: Press & hold ARROWS to quickly adjust
settings.
To exit Pan Mode:
1. Tap the screen.
Figure 7-70: Pan Mode
-13 7.2 mph
Mark A
REAlViEw SPECiFiC OPTiONS
RealView Guidance allows live video input to be displayed instead of
a computer-generated image.
If a Video Selection Module (VSM) is installed on the system, two (2)
video options are available:
• Single Camera View – one (1) of up to eight (8) camera inputs
can be selected to change the view of the video input.
• Split Camera View – one (1) of two (2) sets of four (4) camera
inputs (A/B/C/D or E/F/G/H) can be selected to divide the
screen into four separate video feeds.
RealView Guidance options also include guidance over video and a
steering angle indicator.
Figure 7-71: RealView Options
0.0 mph 0 ac
Mark A
0.0 mph 0 ac
Mark A
0.0 mph 0 ac
Mark A