TeeJet Matrix Pro 840G User Manual - Manual (Page 73)

66
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
reports
Reports is used to create job reports and save them to a USB drive:
NOTE: If Simple Job Mode is selected in the Options page, only the current job can be saved.
When a job is active/started, Reports are not available for selection. Stop the current job to enable the function.
When closing a job with a USB drive in the console, you get the option to create a report on the current job.
1. Press DATA MANAGEMENT side tab .
2. Press
Reports
.
3. Insert USB drive into the console.
4. Select the job to be saved
5. Select:
►PDF
PDF
– report for print
►KML
KML
– Google Earth Map
►SHP
SHP
– ESRI shape data
►ALL
PDF
– all available file types
6. Press RETURN arrow or DATA MANAGEMENT side tab to return to the main Data Management screen.
NOTE: The file icons ALL PDF KML SHP or buttons are not available for selection (greyed out) until a USB drive is inserted properly.
Figure 6-74: Reports - Advanced Job Mode
data
Manage data Transfer
Options Reports
data-> Reports
internal Storage
PdF
KMl
SHP
All
Field 1
Test drive
Fri dec 3 01:02:00 2010
Figure 6-75: Reports - Simple Job Mode
data
Manage data Transfer
Options Reports
data-> Reports