TeeJet Matrix Pro 840G User Manual - Manual (Page 108)

101
98-05238 R1 EN-US
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Next Guideline Feature
If more than one circle pivot guideline is saved, the Next Circle Pivot
Guideline feature will become available. By pressing the Next Circle
Pivot Guideline option, the vehicle will be directed to the next
circle pivot guideline saved in the console.
1. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
2. Press NEXT CIRCLE PIVOT GUIDELINE icon .
Toggle between all guidelines by pressing the NEXT CIRCLE PIVOT
GUIDELINE icon again.
NOTE: If no circle pivot guideline or only one circle pivot guideline is
saved in the console, the Next Circle Pivot Guideline icon will
not be displayed.
Figure 7-45: Next Guideline
-13 7.2 mph
Mark A
A A
To view which guideline is active, press the Guidance Mode icon on
the Status Bar.
Figure 7-46: View Which Guideline is Active
-13 7.2 mph
Mark A
Pattern: Circle Pivot
Name: Stream Edge
Total: 4
last pass Guidelines
Last Pass Guidance offers true last pass navigation. The console will
automatically detect the nearest applied area and establish parallel
guideline based on that area.
To activate Last Pass Guidance:
1. Drive to a desired location to apply the first pass.
2. Travel next to the applied area.
3. The console will begin providing navigation information.
NOTE: If a boundary is established but no application occurred
during the boundary process, guidance will not initiate.
Figure 7-47: Apply First Pass
3:22 PM 7.2 mph
Figure 7-48: Follow Guidance
4:16 PM 7.2 mph