TeeJet Matrix Pro 840G User Manual - Manual (Page 89)

82
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Status/information Screens
GPS Status
GPS Status displays information regarding data rates, number of
satellites in view, and satellite quality and ID. See GPS section in
Setup Chapter of this manual for more information.
1. Press GPS STATUS icon to view data including:
◄GGA/VTG (Data Rates) – the number of GPS positions per
second
◄Num Sats – the number of GPS satellites in view
◄HDOP – a measure of satellite geometry strength in the
horizontal plane
◄PRN – the current DGPS satellite ID
◄GGA Quality – the current quality indicator of the GPS signal
◄Receiver – the current indicator of the receiver
Figure 7-4: GPS Status
-13 7.2 mph
Mark A
-13 7.2 mph
Mark A
GGA Rate: 5 Hz
VTG Rate: 5 Hz
Num Sats: 10
HdOP: 1
PRN: 135
GGA Quality: 2
Receiver: 1
Guidance Mode Status
Guidance Mode Status displays information regarding the pattern of
guidance, name of the current guideline and how many guidelines
are saved in the console.
1. Press GUIDANCE MODE icon to view data
including:
◄Pattern – current guidance mode
◄Name – name of the current guideline
◄Total – how many guidelines are saved in the current job
Figure 7-5: Guidance Mode Status
-13 7.2 mph
Mark A
-13 7.2 mph
Mark A
Pattern: Straight Ab
Name: Stream Edge
Total: 4
Bounded Area Status
Bounded Area Status displays information regarding the areas in the
current boundaries.
1. Press BOUNDED AREA icon to view data including:
◄Working Area – the total area of the external boundary
excluding the internal bounded areas
◄Field Area – the total area of the external boundary
◄Internal Area – the area excluded from the active area (or the
total area of the internal bounded areas)