TeeJet Matrix Pro 840G User Manual - Manual (Page 41)

34
www.teejet.com
HOME
OVER
VIE
W
SE
TUP
POWER
APPENDIX
FULL SCREEN
INTR
ODUC
TION
GUID
ANCE
Setup Option Information
Press the option’s icon or option’s name of any menu item to display
a definition and range values of that item. To remove the information
box, press anywhere on the screen.
Figure 6-2: Example of Information Text Box
Config-> lightbar
brightness
Mode
lEd Spacing 1.50 ft
Swath
50%
The distance illustrated by the
illuminated lEd’s can be customized.
input the desired spacing as required or
individual preference.
lEd Spacing
Drop Down Menu Selections
Press DOWN arrow to access the options. Use the UP/DOWN
arrows or slide bar if necessary to scroll through the
extended list. Select the appropriate option. To close the list without
selecting an option, tap anywhere on the screen outside the drop
down menu.
Figure 6-3: Example of Drop Down Menu
Config-> Vehicle
12.50 ft
0.00 ft
backward
Vehicle Type
Ant Height
dir to boom
dist to boom
Front wheel
Front wheel
Articulated
Tracked
Config->implement
Num Sections
Spray width
Guidance width 75.00 ft
75.00 ft
15
7
8
9
10
11
12
13
14
15
Keyboard Entry Screen
Press the KEYPAD icon to use a numeric keypad to enter a
value. Press Clear to erase the existing value. Press the ACCEPT
icon to save the settings or the CANCEL icon to leave the
keypad without saving.
Figure 6-4: Example of Keyboard
Config-> Vehicle
12.50 ft
0.00 ft
Front wheel
backward
Vehicle Type
Ant Height
dir to boom
dist to boom
Ant Height (ft)
1 2 3
12.50
Clear
4 5 6 <--
7 8 9
0 . +/-
Unavailable Options When Job is Active
When a job is active some setup options are unavailable. See the
Unit Setup Mode Availability Chart for indication of which options are
not accessible.
Figure 6-5: Example of Unavailable Options
Config-> AutoSteer
Enabled
Valve Setup Steering Settings
Valve Test Valve diagnostics
Options
On
Config-> Vehicle
12.50 ft
0.00 ft
Front wheel
backward
Vehicle Type
Ant Height
dir to boom
dist to boom