Face plate area, Bobbin and feed areas, Exterior areas – SINGER 3103 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
Face Plate Area
To clean y and oil A the front interior of
machine, remove screw from feoe plate. With a
soft cloth or lint brush, clean and oil points
indicated by arrows. Replace face plate and
screw.
Bobbin and Feed Areas
To clean bobbin and feed areas, remove needle
plate, as instructed on page 11. Remove bobbin
case as instructed on next page. Using soft
cloth or brush, 1:lean area as illustrated.
Replace needle plate and bobbin case, as
instructed on pages 11 and 61.
Exterior Areas
If necessary, a mild solution of soap and water
may be used on exterior areas to remove
stubborn stains. No other cleaning liquid or
powder should be used.
J
V-
59