Removing and replacing bobbin case – SINGER 3103 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing and Replacing
1. Turn hand wheel toward you to raise needle
to its highest position.
Open slide plate, remove needle plate (see
Insert screwdriver into bobbin case hold A
down and turn it toward the rear as illustr*
To rerrx>ve bobbin case:
Push bobbin case toward the rear and lift
it up and out toward the front.
5. To replace bobbin case:
Guide forked end urKler the feed B.
Draw bobbin case toward you so that
front of case is under the position plateC
Turn bobbin case hold down toward you
to lock bobbin case in position.
6. Replace bobbin, needle plate and close slide