User manual – 3xLOGIC VISIX Camera User Manual

Page 12

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

4  

DETECTING  AND  CHANGING  THE  IP  ADDRESS  

You  need  the  camera  IP  address  to  connect  to  the  network  camera.  
Steps:  
1) To  get  the  IP  address,  the  3xLOGIC  VISIX  setup  utility,  a  software  tool  which  can  automatically  detect  the  

online  network  cameras  in  the  LAN  and  list  the  device  information  including  IP  address,  subnet  mask,  port  
number,  device  serial  number,  device  version,  etc.,  shown  in  Figure  2-­‐3.  

2) Change  the  IP  address  and  subnet  mask  to  the  same  subnet  as  that  of  your  computer.  
3) Enter  the  IP  address  of  network  camera  in  the  address  field  of  the  web  browser  to  view  the  live  video.  

Note:  

!

The  default  IP  address  is  192.0.0.64  and  the  port  number  is  8000.  The  default  user  name  is  admin,  and  
password  is  12345.  

!

For  accessing  the  network  camera  from  different  subnets,  please  set  the  gateway  for  the  network  camera  
after  you  logged  in.  For  detailed  information,  please  refer  to  Section  5.3.1  Configuring  TCP/IP  Settings.  

 

Figure  2-­‐3

:  3xLOGIC  VISIX  detection  utility  

 

Advertising