User manual – 3xLOGIC VISIX Camera User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
SETTING / CALLING A PATROL
A patrol is a memorized series of preset function. It can be configured and called on the patrol settings
interface. There are up to 8 patrols for customizing. A patrol can be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
Setting a Patrol:
1) In the PTZ control panel, click
to enter the patrol settings interface.
2) Select a patrol number from
to enter the adding interface of preset as shown in Figure 4-‐8.
4) Configure the preset number, patrol time and patrol speed.
to another patrol point after the patrol time.
It is the speed of moving from one preset to another.
to save a preset into the patrol.
to save all the patrol settings.
Calling a Patrol:
In the PTZ control panel, select a defined patrol from
to call the
patrol as shown in Figure 4-‐9.