User manual – 3xLOGIC VISIX Camera User Manual

Page 61

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

53  

Set  the  Motion  Detection  Area.  

Steps:    

1) Enter  the  motion  detection  settings  interface  

Configuration  >  Advanced  Configuration>  Events  >  Motion  Detection  

2) Check  the  checkbox  of  Enable  Motion  Detection.  

 

Figure  6-­‐41

Enable  Motion  Detection  

 

3) Click  

.  Click  and  drag  the  mouse  on  the  live  video  image  to  draw  a  motion  

detection  area.  

NOTE:

 You  can  draw  up  to  8  motion  detection  areas  on  the  same  image.  

4) Click  

  to  finish  drawing.  

NOTE:

 You  can  click  

  to  clear  all  of  the  areas.  

5) Move  the  slider  

  to  set  the  sensitivity  of  the  detection.  

 
Set  the  Arming  Schedule  for  Motion  Detection.  

Steps:  

1) To  edit  the  arming  schedule  as  shown  in  Figure  6-­‐43,  click  

  in  Figure  6-­‐42.  

Advertising