User manual – 3xLOGIC VISIX Camera User Manual

Page 65

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

57  

 

Figure  6-­‐46

Tampering  Alarm  

 
2) Check  Enable  Video  Tampering  checkbox  to  enable  the  tampering  detection.  
3) Set  the  tampering  area.  Refer  to  Step  1  Set  the  Motion  Detection  Area  in  Section  6.6.1  

Configuring  Motion  Detection.  

4) Click  

  to  edit  the  arming  schedule  for  tampering.  The  arming  schedule  

configuration  is  the  same  as  the  setting  of  the  arming  schedule  for  motion  detection.  Refer  to  
Step  2  Set  the  Arming  Schedule  for  Motion  Detection  in  Section  6.6.1  Configuring  Motion  
Detection
.  

5) Check  the  checkbox  to  select  the  linkage  method  taken  for  the  tampering.  Notify  surveillance  

center,  send  email  and  trigger  alarm  output  are  selectable.  Please  refer  to  Step  3  Set  the  Alarm  
Actions  for  Motion  Detection
 
in  Section  6.6.1  Configuring  Motion  Detection.  

6) Click  

  to  save  the  settings.  

 

CONFIGURING  EXTERNAL  ALARM  INPUT  

Steps:  
1) Enter  the  Alarm  Input  Settings  interface:  

Configuration  >  Advanced  Configuration>  Events  >  Alarm  Input:  

2) Choose  the  alarm  input  No.  and  the  Alarm  Type.  The  alarm  type  can  be  NO  (Normally  Open)  and  

NC  (Normally  Closed).  

3) Edit  the  name  in  

  to  set  a  name  

for  the  alarm  input  (optional).  

Advertising