Safety instruction, User manual – 3xLOGIC VISIX Camera User Manual

Page 4

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

4  

Safety  Instruction  

These  instructions  are  intended  to  ensure  that  the  user  can  use  the  product  correctly  to  avoid  danger  
or  property  loss.    

The  precaution  measure  is  divided  into  ‘Warnings’  and  ‘Cautions’:  

Warnings:  Serious  injury  or  death  may  be  caused  if  any  of  these  warnings  are  neglected.  

Cautions:  Injury  or  equipment  damage  may  be  caused  if  any  of  these  cautions  are  neglected.  

 

 

Warnings  Follow  these  safeguards  to  prevent  

serious  injury  or  death.  

Cautions  Follow  these  precautions  to  prevent  

potential  injury  or  material  damage.      

Warnings:  

!

Please  adopt  the  power  adapter  which  can  meet  the  safety  extra  low  voltage  (SELV)  standard.  
And  source  with  12  VDC  or  24  VAC  (depending  on  models)  according  to  the  IEC60950-­‐1  and  
Limited  Power  Source  standard.  

!

If  the  product  does  not  work  properly,  please  contact  your  dealer  or  the  nearest  service  center.  
Never  attempt  to  disassemble  the  camera  yourself.  (We  shall  not  assume  any  responsibility  for  
problems  caused  by  unauthorized  repair  or  maintenance.)  

!

To  reduce  the  risk  of  fire  or  electrical  shock,  do  not  expose  this  product  to  rain  or  moisture.  

!

This  installation  should  be  made  by  a  qualified  service  person  and  should  conform  to  all  the  local  
codes.  

!

Please  install  blackouts  equipment  into  the  power  supply  circuit  for  convenient  supply  
interruption.    

!

Please  make  sure  that  the  ceiling  can  support  more  than  50(N)  Newton  gravities  if  the  camera  is  
fixed  to  the  ceiling.  

!

If  the  product  does  not  work  properly,  please  contact  your  dealer  or  the  nearest  service  center.  
Never  attempt  to  disassemble  the  camera  yourself.  (We  shall  not  assume  any  responsibility  for  
problems  caused  by  unauthorized  repair  or  maintenance.)  

Advertising