User manual – 3xLOGIC VISIX Camera User Manual

Page 44

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

36  

 

Figure  6-­‐15

SNMP  Settings  

2)

Check  the  corresponding  version  checkbox  (

,  

,  

)  to  enable  the  feature.  

3)

Configure  the  SNMP  settings.  

NOTE:

 The  configuration  of  the  SNMP  software  should  be  the  same  as  the  settings  you  

configure  here.  

4)

Click  

  to  save  and  finish  the  settings.  

CONFIGURING  802.1X  SETTINGS  

Purpose:  
The  speed  dome  supports  IEEE  802.1X  standard.  
IEEE  802.1X  is  a  port-­‐based  network  access  control.  It  enhances  the  security  level  of  the  LAN.  When  
devices  connect  to  this  network  with  IEEE  802.1X  standard,  the  authentication  is  needed.  If  the  
authentication  fails,  the  devices  don’t  connect  to  the  network.  
 
The  protected  LAN  with  802.1X  standard  is  shown  as  follows:  

Advertising