User manual – 3xLOGIC VISIX Camera User Manual

Page 56

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

48  

 

Figure  6-­‐32

Auto  Mode  Sensitivity  

!

Day:     In  Day  mode,  the  speed  dome  displays  color  image.  It  is  used  for  normal  lighting  
conditions.  

!

Night:     In  Night  mode,  the  image  is  black  and  white.  Night  mode  can  increase  the  sensitivity  
in  low  light  conditions.  

!

Schedule  

In  Schedule  mode,  you  can  set  the  time  schedule  for  day  mode  as  shown  in  Figure  6-­‐33.  The  
rest  time  out  of  the  schedule  is  for  night  mode.  

NOTE:

 This  function  varies  depending  on  the  models  of  speed  dome.  

 

Figure  6-­‐33

Day  Night  Schedule  

 

!

Smart  IR  -­‐  If  the  IR  light  is  on  and  the  image  center  is  overexposure,  you  can  enable  this  function.    

!

IR  Light  Mode  -­‐  IR  light  mode  can  be  set  to  Auto  and  Manual.  

!

Auto:  The  brightness  of  the  infrared  light  will  be  adjusted  automatically.  IR  Light  Sensitivity  
value  ranges  from  0  to  100.  Trigger  Mode  can  be  set  to  Camera  or  Photosensitive.  

!

Manual:  you  need  to  adjust  the  brightness  value  of  infrared  light  manually.  IR  Light  Bright  
value  ranges  from  0  to  100.  

NOTE:

 For  detailed  parameters  configuration  of  IR  light,  you  can  enter  the  OSD  menu  by  

calling  the  special  preset  95.  

 

NOTE:    

!

When  the  IR  Light  Mode  is  auto,  the  day/night  mode  is  adjusted  automatically  according  to  
the  IR  Light  Mode.  Manually  setting  the  day/night  mode  is  invalid.  

!

When  the  IR  Light  Mode  is  manual  and  the  IR  Light  Bright  is  0,  you  can  set  the  day/night  
mode  manually.  

!

When  the  IR  Light  Mode  is  manual  and  the  IR  Light  Bright  is  not  0,  the  night  mode  is  set  as  
the  default  mode.  Manually  setting  the  day/night  mode  is  invalid.  

 

Backlight  Settings  

!

BLC  -­‐  If  there’s  a  bright  backlight,  the  subject  in  front  of  the  backlight  appears  silhouetted  or  
dark.  Enabling  BLC(back  light  compensation)  function  can  correct  the  exposure  of  the  subject.  
However,  the  backlight  environment  is  washed  out  to  white.  

!

WDR  (Wide  Dynamic  Range)  -­‐  The  wide  dynamic  range  (WDR)  function  helps  the  camera  provide  
clear  images  even  under  back  light  circumstances.  When  there  are  both  very  bright  and  very  dark  
areas  simultaneously  in  the  field  of  view,  WDR  balances  the  brightness  level  of  the  whole  image  
and  provide  clear  images  with  details.  

 

Advertising