User manual – 3xLOGIC VISIX Camera User Manual
Page 64
User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
56
CONFIGURING VIDEO LOSS ALARM
Steps:
1) Enter the Video Loss Setting interface:
Configuration > Advanced Configuration> Events > Video Loss
Figure 6-‐45
Video Loss
2)
Check the Enable Video Loss Detection checkbox to enable the video loss detection.
3) Click
to edit the arming schedule for video loss detection. The arming
schedule
configuration
is
the
same
as
the
setting
of
the
arming
schedule
for
motion
detection.
Refer
to
Step
2
Set
the
Arming
Schedule
for
Motion
Detection
in
Section
6.6.1.
4) Check the checkbox to select the linkage method taken for the video loss alarm. Notify
surveillance
center,
send
email
and
trigger
alarm
output
are
selectable.
Please
Step
3
Set
the
Alarm
Actions
for
Motion
Detection
in
Section
6.6.1.
5) Click
to save the settings.
CONFIGURING VIDEO TAMPERING ALARM
Purpose:
You
can
configure
the
speed
dome
to
trigger
the
alarm
actions
when
the
lens
is
covered.
Steps:
1) Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering