User manual – 3xLOGIC VISIX Camera User Manual

Page 37

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

29  

 

Figure  6-­‐2

Time  Settings  

 

CONFIGURING  TIME  SYNCHRONIZATION  BY  NTP  SERVER  

Steps:  

1) Check  the  radio  button  to  enable  the  NTP  function.  
2) Configure  the  following  settings:    

Server  Address:  IP  address  of  NTP  server.  
NTP  Port:  Port  of  NTP  server.  
Interval:  The  time  interval  between  the  two  synchronizing  actions  by  NTP  server.  It  can  be  set  
from  1  to  10080  minutes.  

 

Figure  6-­‐3

Time  Sync  by  NTP  Server  

NOTE:

 If  the  speed  dome  is  connected  to  a  public  network,  you  should  use  a  NTP  server  that  has  

a  time  synchronization  function,  such  as  the  server  at  the  National  Time  Center  (IP  Address:  
210.72.145.44).  If  the  speed  dome  is  set  in  a  customized  network,  NTP  software  can  be  used  to  
establish  a  NTP  server  for  time  synchronization.  

 
 
 
 

 

Advertising