User manual, 3 configuring network settings – 3xLOGIC VISIX Camera User Manual

Page 39

Advertising
background image

User  Manual  

|  VISIX  PTZ  Network  Camera  

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

31  

4) Click  

  to  save  the  settings.  

 

Figure  6-­‐6

DST  Settings

 

 

6.3 Configuring  Network  Settings  

CONFIGURING  TCP/IP  SETTINGS  

Purpose:  
TCP/IP  settings  must  be  properly  configured  before  you  operate  the  speed  dome  over  your  network.  
IPv4  and  IPv6  are  both  supported.  
Steps:  

1) Enter  TCP/IP  Settings  interface:  
   

Configuration  >  Basic  Configuration  >  Network  >  TCP/IP    

   

Or  Configuration  >  Advanced  Configuration  >  Network  >  TCP/IP  

 

Figure  6-­‐7

TCP/IP  Settings  

 

2) Configure  the  NIC  settings,  including  the  IPv4(IPv6)  Address,  IPv4(IPv6)  Subnet  Mask  and  

IPv4(IPv6)  Default  Gateway.  

Advertising